Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
by Powermatic
List Price:
Our Price: $479.99
You Save: $101.01 (17%)
Availability: Usually ships in 24 hours
Category: Tools
See more product details
Product Details
Manufacturer: PowermaticModel: PM701
Product features:
- 3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
- Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation
- Some assembly required
- Includes mortiser, 3/4-inch chisel bushing, chuck extension adaptor, chuck key, and handle
- 16-5/16-by-13/3-4-inch base; 93-pounds; 1-year warranty
- Jet 708582 JMA-582 Mortising Attachment
- Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
- Jet 708585 / MBC-5 5-Piece Chisel and Bit Set
- Jet 350045 Drill Press Enclosed Stand for JMD-18/350018
- Jet 365526 Center Slide Bar Type Drill Press Vise
Description of Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
Includes PM701 3/4 HP Bench Top Deluxe Mortiser - 1791310, Chisel & Tool Holder w/ Sharpening Stone, 1/2-in Drill Chuck, 4-in Chuck Key, Removable Safety Switch KeyTools and Hardware Reviews of Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
Customer Review: Powermatic makes good tools
Summary: 5 Stars
I have had a Powermatic model 66 table saw for nearly ten years, and it has been rock solid. Based on that experience and the reviews of others, when it came time to buy a mortising machine I assumed the tool would be built like a tank and last for generations. I can't speak to the last, but it is solidly constructed. This is the first mortising machine I have owned, and I have only used one other which was an industrial floor model machine at a school. The order arrived earlier than promised, and the packaging was in excellent condition. The tool and all its parts were in great condition, and it was very easy to set up. I checked the backstop and it was square to the table. I bolted it down to a rolling table so I could bring it out when I needed to.
When I ordered the 701, the description of the item included "free open stand", so I was kind of expecting to receive a stand with it. I did not, and when I called Amazon they told me it was not included. I had printed out the page just in case I needed it, and while I was on hold as they checked with the manufacturer and I was transferred to another agent the web page was edited and the "free open stand" listed was removed. Guess what- the second customer service agent says "I don't see anything about a free stand". I told them I had printed it out and offered to fax it to them, at first they were hanging tough, then they said I could get a discount on a stand if I wanted to order one, then they just gave me a credit for the regular cost of a stand! Thank you Amazon! That was more than I expected them to do, and it makes me feel like telling others how good they were.
Back to the mortiser- the motor is 3/4 horsepower, and it is heavy. As beefy as the column is, I was surprised to see it flex every time I turned on the power, but it didn't seem to affect the normal use of the tool. I got my chisel and bit sets the day after this arrived, so I wasted no time in sharpening them further so I could test it out (these chisels need to be very sharp for them to work well). I had trouble getting it set up right, because I thought the bit and chisel sets were either 8" or 9", mine was 8-3/8" so I added the chuck extension and things didn't fit right- the chisel to bit clearance was too great. The manual is not much help here, I went online and found that the normal range is 1/8" to 3/16" (I had nearly 1/2"), so I figured out that I did't need the chuck extension after all. Once that was back off, setup was a snap and I was cutting mortises. Again, the manual didn't spare much energy on describing normal operation, so back online I went to learn that I wasn't supposed to overlap cuts, but space them apart leaving bridges of wood, and coming back and removing them, in order to avoid the chisel being pushed to one side by an unbalanced cut. I have read that the hold down on this tool is not as bad as the competition, but still not as good as more expensive models. I found that in order to be able to shift the wood after the first cut, there had to be a little play between the hold down and the wood, and the front roller blocks and the wood- I ended up having to use pressure from my hands to keep the work aligned as I plunged into and removed the mortising chisel. Maybe with practice this will become easier, but after my first job entailing about 30 mortises I was still experiencing the same.
I love owning and using quality tools, and this is a quality tool. It does what it is designed to do and it does it well. It has the lower RPM that many new design mortisers have in order to keep the drill and chisel sets from burning, and it has a bigger motor to keep it from bogging down at those speeds. If you need to make angled mortise and tenon joints, go for one of the bigger models at five times the price, but don't waste your time going cheaper than this, you'll only be disappointed.
P.S.: I bought the Grizzly tenon jig to go with this, I wrote a review already on it- basically, it works but there must be an easier way to make consistent tenons that hopefully is less time consuming (and the instruction manual for that is awful). I didn't have time to make my own tenoning jig, but I'm not completely happy with that one.
Drill Presses
Tools and Hardware
Bestsellers in Drill Presses
Wilton 15-Inch Drill Press Floor Model, 115/ 230V 1PH, 1HPWMH Tool Group; Tools
Price in other shops:
Milwaukee 4209-1 Electromagnetic Drill PressMilwaukee; Tools
Best price: $1,528.70
Price in other shops:
Wilton 2500 15-Inch Floor Drill PressWMH Tool Group; Tools
Price in other shops:
Northern Industrial Mortising Attachment - For Wood Use OnlyNorthern Industrial Tools; Tools
Best price: $49.99
Factory-Reconditioned DELTA DP350R Shopmaster 1/ 3 Horsepower 12-Inch Bench Drill PressDelta; Tools
Price in other shops:
Palmgren 61301 AP30 3-Ton Manual Arbor PressPalmgren; Tools
Best price: $248.18
DEWALT DW151 Heavy-Duty 6 Amp 1/ 2-Inch Magnetic Drill PressDEWALT; Tools
Price in other shops:
Delta DP115 Shopmaster 8-Inch Deluxe Bench Top Drill PressDelta; Tools
Price in other shops:
DELTA 17-787 1/ 2-Inch Bit SetDelta; Tools
Price in other shops:
Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/ 4-Inch Motor and ChuckMilwaukee; Tools
Best price: $1,266.30
Price in other shops:
Similar Tools and Hardware Products
CMT 543.079.51 5/ 16" Mortising Chisel & Bit SetCMT; Tools
Best price: $13.78
Price in other shops:
Woodstock W1044 4-to-2-1/ 2-Inch ReducerWOODSTOCK; Tools
Best price: $1.25
Price in other shops:
CMT 543.158.51 5/ 8" Mortising Chisel & Bit SetCMT; Tools
Best price: $19.19
Price in other shops:
Fish 03820004K Premium Hollow Mortise Chisel and Bit Set, 4-PieceFish; Tools
Best price: $182.30
Price in other shops:
CMT 543.190.51 3/ 4" Mortising Chisel & Bit SetCMT; Tools
Best price: $25.15
Price in other shops:
CMT 543.095.51 3/ 8" Mortising Chisel & Bit SetCMT; Tools
Best price: $12.64
Price in other shops:
CMT 543.064.51 1/ 4" Mortising Chisel & Bit SetCMT; Tools
Best price: $12.64
Price in other shops:
Powermatic 1791096 4-Piece Mortise Chisel and Bit SetPowermatic; Tools
Best price: $169.99
Price in other shops:
CMT 543.127.51 1/ 2" Mortising Chisel & Bit SetCMT; Tools
Best price: $15.85
Price in other shops:
Woodstock D2845-1/ 4-to-1/ 2-Inch Mortising Chisel Set, 4-PieceWOODSTOCK; Tools
Best price: $36.95
Price in other shops: